| |
 |
| |
| |
The Most Powerful Tuning You Can Buy! The Max Energy Power Programmer extracts every bit of energy possible out of every molecule of fuel giving you more mpg at part throttle and more power at wide open throttle. All this and more... Only from Hypertech.
|
| |
|
|
| |
 |
| |
| |
Have your own Drag Strip timing clocks, Engine Dyno, Chassis Dyno, customizable Gauge Package, Diagnostics tool, and of course, the best high-performance engine tuning available.
|
| |
|
|
| |
 |
| |
| |
Hypertech's new Max Energy E-CON economy Power Programmer extracts every bit of energy possible out of every molecule of fuel to give drivers exactly what they want - more miles-per-gallon at part throttle and more power at wide open throttle.
|
| |
|
|
| |
 |
| |
| |
If you're running non-stock tires, our Speedometer Calibrator can correct the speedometer and odometer for tires up to 54 inches (for most applications). This device is engineered for the speedometer recalibration functions of the Max Energy Programmer, but without the additional expense of the other tuning features. The Speedometer Calibrator also comes with a USB cable and a CD containing software to enable quick updates and upgrades over the internet.
How does it work? Simply plug the Speedometer Calibrator programmer into the vehicle's under-dash connector, select the tire height and new gear ratio, and in a matter of minutes, your vehicle's computer is reprogrammed for accurate speedometer and odometer readings (as required by law).
In addition, the Speedometer Calibrator reads and clears Diagnostic Trouble Codes (DTCs) or "check engine" lights. This allows you to view detailed information about your vehicle�s operation without having to purchase expensive diagnostic computers or scanners used by dealership technicians.
All Hypertech products have a Money-Back, Satisfaction Guarantee!
|
| |
|
|
| |
 |
| |
| |
Plug-In Power In The Palm Of Your Hand
Increasing horsepower and torque is as simple as pushing a button with Hypertech's Power Programmer III! Simply plug the Power Programmer into the underdash diagnostic plug, answer a series of "Yes/No" questions, and the Power Programmer does the rest. The Power Programmer is much more than a tuning chip. It is a self-contained automotive tuning computer!
When you connect the Power Programmer to your vehicle, its "smart" program instantly recognizes your vehicle's powertrain by reading the Vehicle Identification Number (VIN). The VIN contains specific information on the engine, transmission, and drivetrain, which the Power Programmer decodes before it downloads the Power Tuning program that is precisely tailored to your car or truck.
The Power Programmer lets you choose Hypertech's Power Tuning program for regular 87 octane or premium 93 octane gasoline. Both options improve performance without detonation. After the tuning program is selected, the Programmer automatically installs the program and allows you to access and reprogram the vehicle's computer to function properly with aftermarket components such as non-stock tire sizes and rear-end gear ratios.
The Power Programmer is incredibly powerful, but it is also incredibly easy to use. Reprogramming does not require any tools or knowledge of cars or even computers. Plus, you can return to OEM (stock) programming in just minutes.
|
| |
|
|
| |
 |
| |
| |
Based on point-by-point spark curve tuning, the Power Tuning Module (PTM) produces an improvement in performance and driveability you can really feel! Unlike some in-line power control modules that "trick" the computer with false coolant temperature or throttle position signals, the PTM utilizes Hypertech's proven Power Tuning techniques - dyno-developed, optimized spark curves that maximize an engine's horsepower. You get more bang for your buck with a Hypertech Power Tuning Module. The Hypertech PTM is very affordable - and its ability to provide solid performance gains at an economical price make it the top choice among power modules.
- Installation of the PTM is a snap!
- Unplug the wiring harness connector from your truck's computer
- Plug the PTM cable into the computer
- Plug the vehicle's wiring harness into the PTM
That's it!! You're now ready to go rip it up with the most powerful computer tuning on the market! Who else but Hypertech could give you great power gains without a difficult installation?
|
| |
|
|
| |
 |
| |
| |
Power On The Fly
The new Inline Power Tuning Module (PTM) comes with a factory harness that makes installation a snap. No splicing, just plug it into the ECM located in the engine compartment and install the Power Dial in a convenient place on your dash. The Power Dial allows you to select one of three different levels of Hypertech tuning "on the fly" so you can change power levels even while you're driving. Stage 3 tuning (+117 hp) delivers the best performance under all driving conditions. Stage 2 (+82 hp) and Stage 1 (+56 hp) are calibrated for the conservative driver.
Hypertech Power Tuning delivers the most powerful, street-legal tuning available for towing the maximum loads allowed by vehicle manufacturers.
|
| |
|
|
| |
 |
| |
| |
Hypertech Power Chips are direct replacements for the stock chips in 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine's air/fuel ratio and spark advance. Power Chips can be installed in less than 30 minutes using only hand tools. No wiring or soldering is required - just plug in and go! Street Runner and ThermoMaster chips both contain Hypertech Power Tuning programs. ThermoMasters contain special programming that allows the use of a 160-degree or 180-degree thermostat. If you can't or don't want to change the thermostat, then use the Street Runner.
Street Runner Power Chip
The Street Runner Power Chip is designed for daily street driving or competition in unmodified vehicles using a stock thermostat. The Street Runner Power Chip contains Hypertech's powerful engine tuning information to deliver maximum power at full throttle (with increased boost pressures on turbocharged cars). The Street Runner also raises RPM for torque converter lock-up, producing better driveability and smoother shifting. Mileage and emissions during ordinary daily driving are not affected. The Street Runner Power Chip puts fun and excitement in your driving and gives you the extra power you need for passing, pulling, or maneuvering out of a tight situation.
ThermoMaster Power Chip
The ThermoMaster Power Chip, used in conjunction with a low-temperature PowerStat thermostat, is the most powerful chip you can run on the street. The ThermoMaster not only provides maximum performance, but it will also help keep the engine cooler in situations of extreme heat such as emergency vehicles, desert driving, competition, etc. Cool air has more air molecules per cubic inch than hot air. An engine running in cool, dense air produces more horsepower and is less likely to detonate than an engine that is taking in hot air.
The Hypertech PowerStat thermostat lowers both the temperature of the incoming air/fuel mixture and the engine coolant temperature. The ThermoMaster Power Chip is programmed to take advantage of this cooler, more powerful air/fuel mixture produced by the Powerstat. All temperature-sensitive functions controlled by the ThermoMaster chip (such as a minimum temperature for torque converter lock-up, closed loop operation, and in some cars, early fan turn-on) are adjusted for a cooler temperature thermostat. The Hypertech PowerStat is specifically designed for use with the Thermomaster Power Chip.
|
| |
|
|
| |
 |
| |
| |
The Power Module delivers the same performance benefits as other Hypertech Power Tuning products. Spark timing and fuel delievery optimized for your engine point-by-point over the entire wide open operating range.
|
| |
|
|
| |
 |
| |
| |
Hypertech¹s in-Line Speedometer Calibrator Module is an in-line module to correct the speedometer and odometer for unlimited tires sizes and/or rear gear ratios. This module is perfect for vehicles with computers that don¹t allow for tire size and/or rear gear ratio correction or want to re-calibrate for sizes outside the range of programmers.
Installation Is a snap:
Using the USB cable connect the in-line Speedometer Calibrator Module to your PC and enter the new tire height and/or rear gear ratio. There are no limitations to tire height or rear gear ratios. Next, simply disconnect the factory connector to the instrument cluster (behind the dash), snap in the Speedometer Calibrator Module, reconnect the cluster, and you¹re done! In a matter of minutes, you can accurately correct your speedometer and odometer readings (as required by law).
Recalibrates for ANY tire size and/or rear gear ratio. Kit includes USB cable and software CD. Installs easily behind the dash to the factory wiring harness - no splicing required!
|
| |
|
|
|
