| |
 |
| |
| |
US Amps 2 Ch 2400 Watt Power Amplifier
- 150W/Ch @ 4 O
- 300W/Ch @ 2 O
- 600W/Ch @ 4 O Briged Mono
- 2400W x 1 @ 0.5 O Bridged Mono
- <0.025% THD
- S/N >95 dB
- Damping Factor >1000
- Dual Power Toroids
- Variable 24dB Low Pass Crossover
- Subsonic Filter
- 2.7 x 11 x 27.5 Inches
- SAT
- Supplied Remote Bass Gain Control
|
| |
|
|
| |
 |
| |
| |
US Amps 2 Ch 2000 Watt Amplifier
- 600W/Ch @ 4O
- 1000W/Ch @ 2O
- 2000W x 1 @ 4O Bridged
- <0.025% THD
- S/N >95 dB
- Damping Factor >1000
- Dual Power Toroids
- Variable 24dB Low Pass Crossover
- Subsonic Filter
- Dimensions: 2.7 x 11 x 27.5 Inches
- SAT
- Supplied Remote Bass Gain Control
|
| |
|
|
| |
 |
| |
| |
US Amps 5 Ch 500 Watt 5 Power Amplifier
- 75W x 4 @ 4 O
- 90W x 4 @ 2 O
- Subwoofer 500w x 1 Mono @ 1O
- S/N >95dB
- Damping Factor >200
- Variable 24dB Low Pass Crossover
- Dual Power Supplies to Separate Mids/Highs from Bass
- 2.7 x 11 x 19.6 Inches
- Non-computerized SAT
- Supplied Remote Bass Gain Control
|
| |
|
|
| |
 |
| |
| |
US Amps 2 Ch AX Series Amplifier
- 75W x 4 @ 4O
- 90W x 4 @ 2O
- 180W x 2 @ 4O mono
- Bridged Output: 600W X 1 @ 4O
- THD @ 4O: <0.05%
- S/N Ratio: >95 dB
- Damping Factor: >600
- Dimensions: 2.7 x 11 x 16.1 Inches
- Slew Rate: 150 Vus
|
| |
|
|
| |
 |
| |
| |
US Amps 4 Ch AX Series Amplifier
- 75W x 4 @ 4O
- 90W x 4 @ 2O
- 180W x 2 @ 4O mono
- Bridged Output: 180W X 2 @ 4O
- THD @ 4O: <0.05%
- S/N Ratio: >95 dB
- Damping Factor: >200
- Dimensions: 2.7 x 11 x 16.1 Inches
- Slew Rate: 150 Vus
|
| |
|
|
| |
 |
| |
| |
- 250 watts x 1 @ 4 ohm rms
- 400 watts x 1 @ 2 ohm rms
- 600 watts x 1 @ 1 ohm rms
- thd rated power: <1% @ 4 ohm
- signal to noise ratio: >86db
- frequency response: 5hz - 500hz
- more efficient than class d with faster response and 3x the damping factor
- self oscillating power supply
- high mass hand wound toroid cores
- dimensions (dxwxh): 9.1 x 11 x 2.7 (230mm x 280mm x 68mm)
|
| |
|
|
| |
 |
| |
| |
3000W RMS Mono Block Class DE AX Series Amplifier
- 1200W RMS x 1 @ 4 Ohms
- 2000W RMS x 1 @ 2 Ohms
- 3000W RMS x 1 @ 1 Ohms
- Variable Crossover Control: Low-Pass 40-250Hz, 24dB/Octave, Butterworth
- Variable Bass EQ: 30dB Boost @ 45Hz
- Subsonic Filter: 15 - 40Hz, 24dB/Octave
- Low Level RCA Input
- 1 Gauge Power Inputs
- 8 to 18 Gauge Speaker Outputs
- Remote Bass Control
- Power and Protect Indicators
- Class DE
- Dimensions: 2.7"H x 11"W x 27.5"L
|
| |
|
|
| |
 |
| |
| |
US Amps 1 Ch MD Series Amplifier
- 650W x 1 @ 4O mono
1200W x 1 @ 2O mono
2000W x 1 @ 1O mono
- Total Harmonic Distortion: 0.03
- Frequency Response: 20~250
- Power Band Width (Frequency Response): 20~500 Hz
- Crossover Frequency: 40~250 Hz - 15~40 dB
- Damping Factor: 100
- Dimensions: 2.5 x 10.5 x 21.75 Inches
- Fuse Rating: 30A x 3
- Power Voltage Range: 12~16V
- High efficiency Class D design(1D/2D/3D)
- Output stages utilize high-current MOSFET devices
- High speed, audio-grade components in all low-level stages
- Active Constant Current Bias Tracking Circuit
- Platinum-plated RCA inputs and connectors
- Wide range of sensitivity accepts signal from any head unit
- 24dB/octave Subsonic Crossover
- 24dB/octave Lowpass Crossover
- True Line Output
- Auto Bridge feature
- Short Circuit Protection
|
| |
|
|
| |
 |
| |
| |
US Amps 1 Ch MD Series Amplifier
- 550W x 1 @ 4O mono
- 1000W x 1 @ 2O mono
- 1500W x 1 @ 1O mono
- Total Harmonic Distortion: 0.03
- Frequency Response: 20~250
- Power Band Width (Frequency Response): 20~500 Hz
- Crossover Frequency: 40~250 Hz - 15~40 dB 40~1K Hz
- Damping Factor: 100
- Dimensions: 2.5 x 10.5 x 18.25 Inches
- Fuse Rating: 30A x 3
- Power Voltage Range: 12~16V
- High efficiency Class D design(1D/2D/3D)
- Output stages utilize high-current MOSFET devices
- High speed, audio-grade components in all low-level stages
- Active Constant Current Bias Tracking Circuit
- Platinum-plated RCA inputs and connectors
- Wide range of sensitivity accepts signal from any head unit
- 24dB/octave Subsonic Crossover
- 24dB/octave Lowpass Crossover
- True Line Output
- Auto Bridge feature
- Short Circuit Protection
|
| |
|
|
| |
 |
| |
| |
US Amps 1 Ch MD Series Amplifier
- 400W x 1 @ 4O mono
- 750W x 1 @ 2O mono
- 1200W x 1 @ 1O mono
- Total Harmonic Distortion: 0.03
- Frequency Response: 20~250
- Power Band Width (Frequency Response): 20~500 Hz
- Crossover Frequency: 40~250 Hz - 15~40 dB 40~1K Hz
- Damping Factor: 100
- Dimensions: 2.5 x 10.5 x 14.5 Inches
- Fuse Rating: 30A x 3
- Power Voltage Range: 12~16V
- High efficiency Class D design(1D/2D/3D)
- Output stages utilize high-current MOSFET devices
- High speed, audio-grade components in all low-level stages
- Active Constant Current Bias Tracking Circuit
- Platinum-plated RCA inputs and connectors
- Wide range of sensitivity accepts signal from any head unit
- 24dB/octave Subsonic Crossover
- 24dB/octave Lowpass Crossover
- True Line Output
- Auto Bridge feature
- Short Circuit Protection
|
| |
|
|
| |
 |
| |
| |
US Amps 4 Ch MD Series Amplifier
- 100W x 4 @ 4O
- 150W x 4 @ 2O
- 300W x 2 @ 4O mono
- Total Harmonic Distortion: 0.03
- Frequency Response: 10~30K
- Power Band Width (Frequency Response): 10Hz - 50 KHz
- Crossover Frequency: 40~250 Hz - 15~40 dB
- Damping Factor: 400
- Dimensions: 2.5 x 10.5 x 19.75 Inches
- Fuse Rating: 30A x 3
- Power Voltage Range: 12~16V
- High efficiency Class D design(1D/2D/3D)
- Output stages utilize high-current MOSFET devices
- High speed, audio-grade components in all low-level stages
- Active Constant Current Bias Tracking Circuit
- Platinum-plated RCA inputs and connectors
- Wide range of sensitivity accepts signal from any head unit
- 24dB/octave Subsonic Crossover
- 24dB/octave Lowpass Crossover
- True Line Output
- Auto Bridge feature
- Short Circuit Protection
|
| |
|
|
| |
 |
| |
| |
US Amps 4 Ch MD Series Amplifier
- 75W x 4 @ 4O
- 90W x 2 @ 2O
- 180W x 2 @ 4O mono
- Total Harmonic Distortion: 0.03
- Frequency Response: 10~30K
- Power Band Width (Frequency Response): 10Hz - 50 KHz
- Crossover Frequency: 40~250 Hz - 15~40 dB
- Damping Factor: 400
- Dimensions: 2.5 x 10.5 x 15.75 Inches
- Fuse Rating: 30A x 3
- Power Voltage Range: 12~16V
- High efficiency Class D design(1D/2D/3D)
- Output stages utilize high-current MOSFET devices
- High speed, audio-grade components in all low-level stages
- Active Constant Current Bias Tracking Circuit
- Platinum-plated RCA inputs and connectors
- Wide range of sensitivity accepts signal from any head unit
- 24dB/octave Subsonic Crossover
- 24dB/octave Lowpass Crossover
- True Line Output
- Auto Bridge feature
- Short Circuit Protection
|
| |
|
|
| |
 |
| |
| |
US Amps 2 Ch MD Series Amplifier
- 75W x 2 @ 4O
- 100W x 2 @ 2O
- 200W x 1 @ 4O mono
- Total Harmonic Distortion: 0.03
- Frequency Response: 10~30K
- Power Band Width (Frequency Response): 10Hz - 50 KHz
- Crossover Frequency: 40~250 Hz - 15~40 dB
- Damping Factor: 600
- Dimensions [(W) 2.5/63.5(H) x 8.75/222(D) in/mm]: 7.9/200
- Fuse Rating: 30A x 1
- Power Voltage Range: 12~16V
- High efficiency Class D design(1D/2D/3D)
- Output stages utilize high-current MOSFET devices
- High speed, audio-grade components in all low-level stages
- Active Constant Current Bias Tracking Circuit
- Platinum-plated RCA inputs and connectors
- Wide range of sensitivity accepts signal from any head unit
- 24dB/octave Subsonic Crossover
- 24dB/octave Lowpass Crossover
- True Line Output
- Auto Bridge feature
- Short Circuit Protection
|
| |
|
|
| |
 |
| |
| |
US Amps 2 Ch 400 Watt Power Amplifier
- Dynamic power: 400w rms power (2ohm): 200w x 2
- RMS Power (4ohm): 100w x 2
- Bridged Power (4ohm): 520w x 1
- signal to noise ratio: 100db
- frequency response: 10hz to 50khz
- low level input sensitivity: 200mv to 6v
- 3-way switchable crossover(high/low/full)
- continuously variable high & low-pass crossover
- bass eq control @ 45hz: 0 to 12db
- line output with high or low-pass crossover
- platinum-plated connectors
- 2.5 x 8.75 x 9.75 Inches
|
| |
|
|
| |
 |
| |
| |
US Amps 2 Ch 1600 Watt Power Amplifier
- Dynamic power: 1600w
- RMS power (2ohm): 400w x 2
- RMS Power (4ohm): 200w x 2
- Bridged power (4ohm): 1100w x 1
- Signal to noise ratio: 100db
- frequency response: 10hz to 50khz
- low level input sensitivity: 200mv to 6v
- 3-way switchable crossover(high/low/full)
- continuously variable high & low-pass crossover
- bass eq control @ 45hz: 0 to 12db
- line output with high or low-pass crossover
- platinum-plated connectors
- Dimensions: 2.5 x 8.75 x 14.5 Inches
|
| |
|
|
| |
 |
| |
| |
US Amps 1 Ch 2000 Watt Power Amplifier
- Dynamic power: 2000w
- RMS power (1ohm): 1200w x 1
- RMS Power (2ohm): 300w x 1
- RMS Power (4ohm): 150w x 1
- signal to noise ratio: 80db
- frequency response: 20hz to 500hz
- low level input sensitivity: 200mv to 6v
- continuously variable low-pass crossover
- bass eq control @ 45hz: 0 to 12db
- line output with low-pass crossover
- platinum-plated connectors
- Dimensions: 2.5 x 8.75 x 14.5 Inches
|
| |
|
|
| |
 |
| |
| |
US Amps 1 Ch 4000 Watt Power Amplifier
- Dynamic power: 4000w
- RMS Power (1ohm):1500wx1
- RMS Power (2ohm): 450wx1
- RMS Power (4ohm): 200wx1
- signal to noise ratio: 80db
- frequency response: 20hz to 500hz
- low level input sensitivity: 20mv to 6v
- continuously variable low-pass crossover
- bass eq control @ 45hz: 0 to 12db
- line output with low-pass crossover
- platinum-plated connectors
- Dimensions: 2.5 x 8.75 x 15.75 Inches
|
| |
|
|
| |
 |
| |
| |
US Amps 4 Ch 400 Watt Power Amplifier
- Dynamic power: # 400w rms power (2ohm): 100w x 4
- RMS Power (4ohm): 50w x 4
- Bridged Power (4ohm): 260w x 2
- Signal to noise ratio: 100db
- Frequency Response: 10hz to 50khz
- low level input sensitivity: 200mv to 6v
- 3-way switchable crossover(high/low/full)
- continuously variable high & low-pass crossover
- bass eq control @ 45hz: 0 to 12db
- line output with high or low-pass crossover
- platinum-plated connectors
- Dimensions: 2.5 x 8.75 x 14.5 Inches
|
| |
|
|
| |
 |
| |
| |
- US Amps Xterminator Series
- 1600 Watt Dynamic Power
- 3 Way Switchable Crossover
|
| |
|
|
|
